How to Successfully Nail into Brick

Brick is a term that can encompass both more and less things than what interested individuals might have expected. For starters, bricks can be made out of various materials using various methods. To name an example, the earliest bricks were mudbricks made by being dried out in the open air, which had a number of serious issues but were nonetheless very convenient.

This was particularly true in places that were short on timber because that meant that fired bricks were that much more expensive. Having said that, it is important to note that bricks have remained the same in a lot of respects, as shown by how most bricks are still fired bricks made out of clay. Amusingly, there are serious limits on the size of a brick, which is why bricks are bricks while blocks are blocks. In any case, bricks continue to see a lot of use in the present. As a result, it makes sense for a wide range of questions to come up, which includes some that can seem very strange on initial consideration. To name an example, consider the question of how one can put a nail into a brick.

Table of Contents show

Can You Use a Hammer to Drive a Nail Into a Brick?

Interested individuals might wonder whether it is possible to drive a nail into a brick by using a hammer or not. After all, they can use a hammer to drive a nail into a wide range of other things, so it is worth wondering in this case as well. Unfortunately, chances are good that interested individuals can guess that this isn’t possible. Brick is very strong. Unfortunately, brick is also very brittle. Thanks to that, if someone tries to drive a nail into it using a hammer, they are going to do nothing more than chip it.

How Can You Put a Nail in a Brick?

Instead, interested individuals are going to need to drill into the brick. This should start with them marking the place where they want to put in the nail. Theoretically speaking, interested individuals can do this by eyeing it. In practice, most of us aren’t going to be able to do a very good job that way, which is a serious issue when a poorly-drilled hole can look very unpleasant.

Once that has been completed, interested individuals can then install a masonry bit on their drill. Be warned that this masonry bit should have the exact diameter of the nail that is intended to go into the hole. Otherwise, they are going to have serious issues with either putting the nail in, keeping the nail in, or both.

As for the actual drilling, make sure that the dominant hand is holding onto the trigger while the other hand is under the front just in the back of the chunk. Furthermore, make sure that the bit is positioned over the mark at a 90-degree angle, which is important because people will want a straight hole rather than a slanted hole. Then, interested individuals should drill the hole to the desired length before pulling out. Afterwards, spray both the nail and the hole intended for the nail with a lubricant so that it will be easier to put in the nail. If necessary, use the gentle taps of a hammer but no more than that to help out the process.

Permanent Process

Drilling a hole in brick is a rather permanent process. If interested individuals want, they do have some methods for fixing it. For example, they could make a mix of mortar and water that has been colored using either brick-dust or a suitable pigment before packing that into the hole and then pressing a brick into it to create the right look. Similarly, they could fill in the hole using silicone caulk before pressing brick-dust onto the result to create the right look. Even so, the finished product won’t be exactly the same as what it once was.

As such, interested individuals should do their best to get everything done right the first time around so that they can minimize the complications for themselves. If necessary, they might want to spend some time practicing the drilling of straight holes in brick so that they can build up some experience before actually making the hole that they want to make. With this as with other things, reading about a process is no substitute for running through the process. For that matter, practice makes perfect.

Further Considerations

Of course, there is always the option of calling in a professional to do the job. As these things go, putting a nail into brick isn’t particularly complicated, so it should be manageable even for people who aren’t particularly familiar with these things so long as they are willing to put in enough time and effort on this project.

Even so, there are various reasons why people might not want to do so. For example, they might not have the necessary equipment. Furthermore, they might not want to buy the necessary equipment that they don’t expect to use again after this. Alternatively, people might not have the necessary time and effort needed to do everything because they are just that busy. Whatever the case, if people don’t want to do this on their own, there is still the option of calling in a professional.

Naturally, interested individuals should make sure to do the necessary research for their potential candidates even when it comes to something as simple as this. Yes, anyone with the right expertise, experience, and equipment should be able to get the job done in no time at all. Unfortunately, unless people do the research, they can’t be sure that they will actually be getting someone with the right expertise, experience, and equipment. Anyone can make claims on the Internet.

Sadly, backing them up is a separate matter, which is why looking up reviews and testimonials are so important. If people choose not to do this project on their own, they should still make sure that they choose the right professional. Otherwise, well, suffice to say that fixing the mistakes of a bad contractor can be a huge hassle in its own right.