Ryobi batteries have gotten a bad rap for not being reliable, depending on who you talk to. While some consumers have no complaints about the brand, others have had little good luck with them. Why are Ryobi batteries so bad? The real problem is that there are a lot of people who have had trouble recharging them. There have been some issues with Ryobi batteries and some consumers have had the bad luck of owning multiple appliances and tools that require these power sources. It’s frustrating and expensive to have a battery fail soon after buying it. Here is everything you need to know about why Ryobi batteries are so bad, and some of the known fixes to remedy the problems.
Problems with Ryobi batteries
The Appliance Analysts have experience with deal Ryobi batteries and they know that the brand has had its share of issues, just like many other lithium-ion brands, but most of them are fixable without buying a replacement. Here are some of the reasons why your Ryobi battery might let you down and what you can do about it.
One of the most frequent complaints about Ryobi lithium-ion batteries is that they are dead and won’t charge. The experts explain that this is usually because Ryobis can go into sleep mode, then get stuck there. Yes, it’s a defect in the battery but it doesn’t mean that you need to throw it away and buy a new one. Instead, apply the mini charge fix. This is accomplished by taking the battery and slipping it into the charger but only leave it n there for a few seconds. It’s important when applying this fix that you take the battery out before the lights begin to flash. You’ll need to do this for about thirty minutes, so set aside a half-hour to apply the fix. The series of mini charges of just a few seconds at a time may charge the battery to a high enough level for it to revive and begin taking a normal charge.
Important checklist for Ryobi battery charging
Ryobi lithium-ion batteries are not a lot different than other brands, and there are some things that you should know about charging them properly to get the longest life from them. There are two important factors to keep in mind. First, you need to make sure that the terminals are clean and in good working order. If the terminals that connect the battery to the charger become dirty or corroded, there will be interference with the flow of power. The battery will not be able to charge properly. Make sure that the contacts are clean. you can wipe them down with alcohol or use a wire brush to make sure that they’re free of gunk and dirt. if the contacts are rusted, a small wire brush or light sandpaper can help to clear them of the corrosion, but go lightly so you don’t damage the delicate contacts. Make sure that they are clean and dry before you plug the battery into the charger though. The second thing to check is the changing temperature for your Ryobi battery. The ideal charging temperature is between 41 and 113 degrees Fahrenheit. It’s wise to make sure that your battery is at room temperature before you attempt to charge it. If the temperature is too hot or too cold, the extreme could interfere with the normal charging of the battery. It is also worth noting that leaving Ryobi lithium-ion batteries in extreme temperatures for long periods can cause permanent damage. These extremes could ruin them, resulting in the need for replacement.
Hunker explains that rechargeable batteries are subject to experience battery crystallization. It can happen when the batteries discharge. Sometimes the compounds inside of them form crystals. This crystalization makes it difficult for the batteries to accept a charge. It’s one of the problems that users have experienced with Ryobi batteries. The crystals can interfere with the battery memory or the way that the battery accepts a charge. It can cause the battery to remember a lower power level, as strange as this may sound. It is a problem that most users can fix on their own if the battery doesn’t take full charge. The fix to apply is called the charging and discharging process. It’s a method for refreshing the battery to make it accept a full charge once again. Unless the cells in the battery are badly damaged, this fix generally works.
Battery discharge repair
Place your Ryobi battery into its charger. Next, turn the charger on and allow the battery to fully charge. Turn the charger off, remove the battery and give it a cool-down period. After the battery is at room temperature, insert it into the tool that it was intended for. Run the tool and allow the battery to discharge until the tool will no longer function. turn off the tool, cool the battery for 15 minutes, then turn the tool on again. Run it until it stops running. Repeat the resting process and running process until the battery becomes so weak that the tool will no longer turn on after a cool-down period. Insert the battery into the charger and give it a full charge. Remove the battery and put it back into the power tool. If it runs the tool longer, you’ve likely fixed the problem and your battery will now accept a full charge. If this doesn’t work, your battery may need to have some of the cells replaced. It may be taken to a professional who specializes in this type of repair.
Ryobi batteries do have a reputation for failing, but not all of them are bad. If you have a defective Ryobi battery it could be due to misuse or improper storage. There is a chance that the battery is defective, but there are usually ways to fix them if they’re not too badly damaged.