How to Remove a Sticker from The Mirror
Have you ever had a sticker on your mirror and couldn’t get it off? It can be frustrating to try to peel it off and end up with pieces of the sticker still left on the mirror. When you succeed to remove the sticker, you are left with a sticky residue that damages the appearance of the mirror. In this article, we will discuss effective ways to remove a sticker from the mirror.
The heat and scrape method
Before deciding to use solvents and liquid products to loosen the sticker from a mirror, you should try applying heat to it using a hairdryer. What you need to do is blast the sticker with heat for about 30 seconds to a minute. According to Ehow, what will happen is that the heat will soften the adhesive to make it easier for you to peel the sticker off. After applying heat, use your fingernails to scrape the sticker off the surface. You can also use a razor blade to do this but be very careful not to scratch the mirror. As you proceed with scrapping, make sure you are pulling the loose pieces of the sticker with your fingers and not the razor blade. If the scraping and heating method works, you will effectively remove the sticker.
Soapy Water Method
If the heat and scrape method doesn’t work, you can try using soapy water to remove the sticker. Start by mixing dish soap and warm water in a bowl. Then, soak a sponge in the soapy water and smear it around and on the sticker. Leave it for some time, then scrub the sticker with a rag. If the sticker is still not coming off, you can try using a putty knife blade to carefully scrape it off.
Household Solvent Method
If you have a sticker on your mirror that you can’t seem to get off, don’t fret. You can remove it easily with a little household solvent. To start, you’ll need to gather some supplies. You’ll need a pair of gloves, a rag, and some acetone or nail polish remover. According to A Clean Bee, acetone is a strong solvent, so if you have that on hand, go ahead and use it. If not, nail polish remover will work just fine. First, put on your gloves, then soak your rag in the solvent of your choice. Once it’s saturated, lay it over the sticker. Allow it to sit for a few minutes to loosen the adhesive. After a few minutes, you should be able to peel the sticker off easily. If it’s giving you some trouble, go ahead and soak the rag in the solvent again and lay it over the sticker for a few more minutes. If the mirror has a frame, be careful when using these solvents, as any drips on the frame will cause damage. You can tape the frame and lay a cloth on the floor too, just in case of anything.
Other Adhesive Removal Products
If you don’t have any of the above products, don’t worry. Other items can be used to get the job done. Try using either the WD-40 or Goo Gone. To remove a sticker using WD-40, first, spray the sticker with WD-40. Then use an old credit card or other blunt objects to slowly peel the sticker off of the mirror. To remove a sticker using Goo Gone, first, apply Goo Gone to the sticker. Leave it for a few minutes, and then use a silicone scraper to gently take off the sticker. You can repeat the process if there are some pieces left on the mirror.
The Diluted White Vinegar method
This method is simple and only requires things that are probably already in your home. You will need a bowl, some white vinegar, and a cotton ball. Fill the bowl with vinegar and soak the cotton ball. Once it is soaked, apply it to the sticker and wait for a few minutes. Then use the cotton ball to rub the sticker in a circular motion. According to Hunker, the vinegar will start to break down the adhesive, and the sticker should start to come off. In case it is not coming off easily, you can repeat the process.
How to Remove Sticker Residue from Glass
Now that you’ve removed most of the sticker, you may be left with some residue. Don’t worry, this is easy to remove as well. You can use the following methods to have your clear mirror back;
The Baking Soda and Cooking Oil
Combine baking soda with cooking oil to form a paste. Apply the paste to the residue and let it sit a little bit. After a few minutes, use a clean cloth to wipe it away. You may have to repeat the process a few times to remove all the residues, but it will eventually come off.
The WD-40 Method
This is probably the easiest method. All you need is a can of WD-40 and a paper towel or rag. Spray WD-40 onto the sticker residue and give it a minute or two to react. Then, use the paper towel or rag to rub the sticky residue off.
Goo Gone
It is one of the popular products of adhesive removers. It effectively removes the sticker and the residue. Use a cleaning clothe and the Goo Gone to wipe the residue out. Once the sticker and the residue are off, you can clean the mirror with a glass cleaner. You can now enjoy the view of your sparkling mirror.
Conclusion
As you can see, removing a sticker from the mirror is not as complicated as one would have imagined. It is a simple process that can be completed in just a few minutes. With the help of the right tools and some patience, anyone can remove a sticker from the mirror. Follow the steps discussed above and give your mirror a new look without damaging the surface.
You can also read:
- Here’s How to Replace a Mirror in the Frame
- How to Remove Dried Glue From a Mirror
- 7 Easy Ways to Hang a Frameless Mirror