How to Remove a Bathroom Sink Stopper so you Can Clean

It is not uncommon for a sink stopper to become stuck when it is wet. This can prevent the water from draining properly, and can be frustrating to someone who needs access to the drain. Listed below are steps that you can take in order to remove the sink stopper so that you can properly clean your sink and drain.

Step One: Examine the Sink

Before attempting to remove the sink stopper, you should first examine it. If it is corroded or extremely difficult to move, you will want to consider replacing it before you attempt to remove it. Replacing the sink stopper is very similar in process, but you will want to buy a new one so that your drain is not left without an alternative for a stopper. This can be found at your local hardware store.

Step Two: Take the Sink Stopper Apart

The next step is to disassemble the sink stopper. You will take the stopper apart by unscrewing one side from the other, and then unscrewing both sides in order to remove it from its mechanism. Once removed, you can clean each component individually, or replace them all if they are corroded or appear damaged.

Step Three: Clean the Sink Stopper

The last step is to clean the sink stopper. You can wash it in soap, water and vinegar if it appears to be damaged. If you are replacing the sink stopper, make sure that all of your parts are completely dry before reattaching the pieces to their mechanism. Until you reattach each part, you will want to place it on a towel or other absorbent material. By taking these steps, you can learn how to remove a bathroom sink stopper to clean. Stripping and replacing your sink stopper is not a difficult process, but it does require that you be patient and follow each step precisely in order to avoid causing more problems in the future.

Tools You’ll Need To Clean A Sink

  • Kitchen sink stopper removal – A special tool for removing the bottom of the sink drain.
  • Eraser to clean the rim of a tinny drain – This is used to remove small pieces of white stuff from around the top rim of a drain.
  • Bathroom cleaner for grease and grime – For removing soap scum and other gunk from around drains and tubs.
  • All Purpose Cleaner & Scrubber for delicate surfaces – For washing and scrubbing around faucets, taps, etc. The bristles are gentle on the surrounding surfaces.
  • Electronic toothbrush – The toothbrush is used for scrubbing grime and soap scum from the sides of a sink or bathtub.

How Often Should You Clean A Bathroom Sink?

The frequency with which you should clean a bathroom sink depends on three factors:

  1. How many people use the sink? – The more people that use the sink, the more often you will want to clean it. This is because dirty hands are very hard to remove from a bathroom sink, and even one person tends to leave several smudges of dirt around the drain.
  2. The type of sink – The material that your bathroom sink is made from can influence its cleanliness and thus the need for frequent cleaning. For example, porcelain sinks tend to build up more soap scum than wooden ones.
  3. How dirty is the sink? – If you let dirt and grime build up on a bathroom sink without cleaning it regularly, it will become extremely hard to clean. Cleaning a dirty bathroom sink is more difficult than cleaning a dirty kitchen one because bathrooms hold grime better. Even the tiniest speck of dirt will be visible once a bathroom sink has accumulated enough grime to notice.

Bathroom sinks are often overlooked, and cleaning them on an infrequent basis can lead to some problems. Cleaning your bathroom sink at least once per month is a good idea, however you will want to clean it more frequently if it becomes dirty.

How To Prevent Bathroom Sink Rust

Bathroom sinks tend to lose their shine if they are not cleaned frequently enough. There are many different ways that you can prevent bathroom sink rust.

  • Step One: Frequent Cleaning – The first step in preventing bathroom sink rust is to clean your sink regularly. Even the smallest trace of grime or water stains left around the drain of a bathroom sink will eventually add up and become noticeable once you look back at it later on.
  • Step Two: Add a Protective Coating – The second step in preventing bathroom sink rust is to apply a protective coating to the drain of the sink. A non-stick surface is hard to keep clean, and if you do not clean it frequently you will have a hard time cleaning away any stains that may build up. This is why it is important to choose a material that will protect your sink from stains in the first place.
  • Step Three: Avoid Water Collecting – The third step in preventing bathroom sink rust is to avoid water collecting. Water collecting on the inside of a bathroom sink can cause it to develop a layer of rust, and if you do not clean that layer away it will become noticeable down the road.

Final Thoughts

Removing a bathroom sink stopper is not an incredibly difficult process, and nowadays there are a variety of products on the market that can do the job efficiently. It is also important to remember that bathroom sinks are not always hard to get at, so if you have one that is easy for you to remove then it will be well worth the effort in the long run. Fixing a clogged bathroom sink can be difficult work when you do not have the right tools. However, after carefully researching this topic we feel that we can help you find the best product for your need. Lastly, preventing sinks from getting clogged is an important step to keep in mind. If your sink is clogged, it means that the water has nowhere to go but back up. Frequently cleaning your pipes will ensure that it doesn’t get clogged often.

You can also read:

Similar Posts

Leave a Reply